A.J. PLAST PUBLIC COMPANY LIMITEDSET: AJ🇹🇭 TH

Business Operation · 2024

Corporate Information

Company Name

A.J. PLAST PUBLIC COMPANY LIMITED

Telephone

0-2415-0035 ext. 144

Website

www.ajplast.co.th

Email

investment@ajplast.co.th

Dividend Policy

Dividend Policy

The Company has a policy to pay dividends of not less than 30% after allocation to statutory reserve. This depends on the use of cash flow, investment plans, conditions of money and capital markets, and conditions set by financial institutions. The interim dividend payment depends solely on the discretion of the Board of Directors, share dividends can be substituted for cash dividends.

For the fiscal year ended December 31, 2024, the Company has paid dividends, details are as follows:

• 2024

- Net profit (loss) per share was (1.38).

- Dividend per share was none.

- Dividend payout ratio (%) was 0%

• 2023

- Net profit (loss) per share was (0.83).

- Dividend per share was none.

- Dividend payout ratio (%) was 0%

• 2022

- Net profit (loss) per share was 0.07.

- Dividend per share was 0.38.

- Dividend payout ratio (%) was 398.31%

Historical Dividend Payments

This YearLast Year2 Years AgoMetricDescription
000.1Net profit per share (Baht : Share)Net profit per share (baht : share)
000.38Dividend per share (Baht : Share)Dividend per share (baht : share)
000Dividend stock ratio (Number of original shares: dividend shares)Ratio of stock dividend payment (existing share : stock dividend)
000Dividend share value per share (Baht : Share)Value of stock dividend per share (baht : share)
000.38Total dividend payment value (Baht : Share)Total dividend payment (baht : share)
00398.31Dividend payout ratio to net profit (%)Dividend payout ratio compared to net profit (%)

Major Shareholders

Major Shareholders

No.NameShares% SharesParent No.
2,992Suthisamphat Group245,049,61041.08
7,227SCG Chemicals Co.,Ltd.55,024,9609.29
7,229AUCTUS HOLDINGS LIMITED37,171,3726.23
7,230ฺBangkok Bank Public Company Limited28,000,0004.69
7,231Cholkadeedamrongkul Group33,284,1005.58
7,232Mr. Narat Ngarmapichon10,600,0001.78
7,233Bualuang Long-Term Equity Fund7,869,1461.32
7,234Mrs. Parinya Khancharoennsuk5,053,0530.85
7,235THAI NDVR Co., Ltd.4,181,4610.7
7,236SINSUKJAI Co.,Ltd.4,004,0000.67
9,930Mr. Narong Suthisamphat37,424,6156.272,992
9,931Mr. Kittiphat Suthisamphat 145,428,22624.382,992
9,932Mr. Pumpanchat Suthisamphat 55,395,4029.292,992
9,933Ms. Ajala Suthisamphat6,801,3671.142,992

Business Strategies Overview

Introduction

The Company sets the vision to be a leader in plastic film manufacturing. The Company is acknowledged as having a continuous investment and development in its innovation—to be fair to trade partners—to deliver good products and services, to encourage social responsibility, and to concentrate on work safety. While maintaining nature and the environment, providing customers with quality products and fair prices that benefit shareholders. The Board of Directors sets objectives concerning vision, strategy, target, policy, direction, and monitoring to ensure that the Company’s strategy is compliant. To prepare the long-term strategy and annual budget and delegate the management to make a presentation. The Board expressed its opinion together with the management before approval and set duties and responsibilities for the Board, Management, Audit Committee, Nomination and Remuneration Committees, Risk Management Committee, Corporate Governance and Sustainability Management Committees, and the Managing Director, especially the responsibilities in financial operation (details in No. 7 Corporate Governance Structure and Key Information Related to Directors and Sub-Committee).








































Chairman's Message

Data pending
Data will appear once ingested from the 56-1 One Report filing.

Vision

To be a leader in plastic film production technology that meets international standards focuses on product development, and innovations environmentally friendly for sustainable development.

Objectives

The objectives of the Company are as follows:

• To establish leadership in plastic film manufacturing technology.

• To develop and produce products to meet international standards.

• To bring innovation to develop environmentally friendly plastic film products to create sustainable development.

Goals

The Company has a business plan to become a leader in the plastic film business for packaging. In the past year, the Company has had production capacity of BOPP film, BOPET film, BOPA film, CPP film, Metallized film and Coated film in line with market and customer demand. From the Company's continuous increase and expansion of production capacity, the Company has expanded its production base to support market growth by investing in a subsidiary in Vietnam under the name A.J. Plast (Vietnam) Co., Ltd. by signing a joint venture agreement with SCG Chemicals Public Company Limited. In 2023, the BOPP production capacity will be 34,000 tons. The Company also aims to expand its efficient production base in the country with new BOPP and BOPET film production in 2022-2023. The METALLIZED film production machine was installed.


The Company has set 6 goals for the organization which are as follows:

• Financial performance based on growth and profitability

• Production efficiency

• Quality control

• Customer Satisfaction Assessment Results

• Employees. The Company aims to be the employer of the employee's heart.

• Sustainability, environmental, social and corporate governance.


Mission

1. Continuously improve product and service quality

2. Being a fair partner with fair price

3. Operate the business of environmentally friendly plastic film products to create sustainable development

4. Stakeholders including those involved with the highest responsibility

Business Strategies

The Company has adopted a sustainable business strategy to drive sustainable growth, environmentally and socially responsible business. This strategy will be in line with corporate culture and support the United Nations' Sustainable Development Goals: SDGs. We support UN SDGs targets of 13 out of 17 targets.


Click to view Operational Sustainability Strategy disclosed on the Company's website















Material Changes & Developments

Material Changes & Developments

YearDescription
2,024

The Company has not had any material changes or developments regarding the change of control of the Company and the nature of its business operations in the past year.

Use of Proceeds from Securities Offerings

Is There Money Raised from a Securities Offering Still to Report On?

Yes

Offerings

Type of SecuritiesAmount Raised Given AsAmount Raised (Million Baht)Uses of the MoneyUsed as Declared?Progress / Reasons and Measures if Not Used as Declared
Equity Instruments2873918,487,800.812024-12 · Objective: To repay loans from financial institutions · Period type: 2870 · Start period: 2024-06 · Spent amount type: 2873 · Start spent amount: 459000000.0 · Expected amount type: 2873 · Start expected amount range: 459000000.0 · 2024-12 · Objective: To use as working capital · Period type: 2870 · Start period: 2024-06 · Spent amount type: 2873 · Start spent amount: 459000000.0 · Expected amount type: 2873 · Start expected amount range: 459000000.0Y

The Company has used the capital increase to repay loans from financial institutions and use as working capital in accordance with the objectives of using the capital increase which have been approved by the shareholders' meeting.

Law Governing the Debt Securities

-

Commitments Made in the Registration Statement

Are There Commitments or Conditions from an Offering or Listing?

No

Group Operating-Structure Policy

Description

The Board of Directors Meeting no. 10/2020 on October 29, 2020 have approved to establish a subsidiary and a joint venture in Vietnam with SCG Chemicals Public Company Limited. On November 5, 2020, the Company entered into a Joint Venture Agreement with SCG Chemicals Public Company Limited to established a company in Vietnam for manufacturing and distributing packaging films. The joint venture company has a registered capital of 1,526 million baht, of which the company hold 55% of the total issued and paid-up capital.


Shareholding structure of the group

List of shareholders

1. A.J. Plast Public Company Limited shareholding 55%

2. SCG Chemicals Public Company Limited shareholding 45%

Structure of the directors of a joint venture company

1. Mr. Kittiphat Suthisamphat Chairman (representative from the Company)

2. Mr. Thosphol Chinandej Director (representative from the Company)

3. Mr. Prasan Onwong Director (representative from the Company)

4. Mr. Chatri Eamsobhana Director (representative from SCG Chemicals Public Company Limited)

5. Mr. Nawee Butsuntorn Director (representative from SCG Chemicals Public Company Limited)

Companies Where the Company Holds ≥10%

Companies (≥10% Holding)

Company NameAddressTelephoneBusiness TypeSecurity TypeSharesPaid-up Shares
A.J. Plast (Vietnam) Company LimitedLot C-12B-CN, Bau Bang Expansion Industrial Park, Lai Uyen Town, Bau Bang District, Binh Duong Province, Vietnam.+6681-865-5006Produce and Sell filmsCommon shares1,042,543,605,3631,042,543,605,363

Shareholders with Potential Conflict of Interest

Has Potential-Conflict Shareholder (Y/N)

No

Relationships Among Major Shareholders

Relationship Exists (Y/N)

No

Shareholders' Agreement

Agreement Exists (Y/N)

No

Shareholding Diagram (Group Structure)

Subsidiaries

Company NameJuristic Persons / Holders
A.J. Plast (Vietnam) Company LimitedA.J. PLAST PUBLIC COMPANY LIMITED · Voting rights percent: 55.0 · Shareholding proportion percent: 55.0 · SCG Chemicals Public Company Limited · Voting rights percent: 45.0 · Shareholding proportion percent: 45.0

Income Structure

Product / Service Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenue from operationsTotal revenue from operations7,016,8861007,518,6411009,061,658100
BOPP Film3,822,85454.483,839,18751.064,345,62347.96
BOPET Film1,226,27917.481,533,40420.392,026,60922.36
Metallized Film584,9848.34741,8509.87855,6799.44
BOPA (Nylon) Film1,163,01916.571,136,15615.111,482,35116.36
CPP Film214,1543.05257,2303.42328,0913.62
Coated Film5,5960.0810,8140.1423,3050.26
OtherOthers000000

Export Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenueTotal revenue7,016,8861007,518,6411009,061,658100
DomesticDomestic3,388,10748.293,454,46045.954,112,14945.38
InternationalInternational3,628,77951.714,064,18154.054,949,50954.62

Other Income

Operating Other IncomeNon-Operating Other IncomeShare of Profit
1710 · As of year: 117160.0 · Description: Total other income · As of yesteryear: 114034.0 · As of year before yesteryear: 72698.0 · 1711 · As of year: 34782.0 · Description: Other income from operations · As of yesteryear: 27510.0 · As of year before yesteryear: 24667.0 · 34782.0 · Description: Scrap sales · As of yesteryear: 27510.0 · As of year before yesteryear: 24667.01712 · As of year: 82378.0 · Description: Other income not from operations · As of yesteryear: 86524.0 · As of year before yesteryear: 48031.01713 · As of year: -111745443.97 · Description: Share of profit · As of yesteryear: -41451583.45 · As of year before yesteryear: -8432716.35

Product / Service Characteristics

Introduction

Flexible Packaging Industry

The packaging industry is continuously expanding especially the flexible packaging which has growth rate (comes from the domestic and export markets) higher than other packaging types. The growth of flexible packaging comes from the following factors;

1. Population growth

2. Growth of income per capita

3. Consumer behavior

4. Increasing number of packaging converters

5. Expansion of distribution channels especially modern trade

6. Excellent uniqueness that adds value to the products

7. Lower cost than other packaging materials


The flexible packaging types that the Company produces are as follows, BOPP film, BOPET film, BOPA film (Nylon), CPP film, METALLIZED film, and COATED film are directly linked to foods and confectionary industries by around 70%, and the rest of belongs to other packaging types. The flexible packaging will eventually continue to grow no matter the level of economic growth. Those film types will be used for different applications and the users must compare the characteristics of the film which is suitable for products, price can be a factor in deciding the purchase from users.


Business Type

3114

Business Groups

Business GroupDescription
Plastic film manufacturer and distributor

The Company is engaged in manufacturing and distributing flexible packaging materials i.e. BOPP film, BOPET film, BOPA film (Nylon), CPP film, METALLIZED film, and COATED film. The Company’s products are used in producing consumer goods packaging, such as food and snack packages, garment bags, flower sleeves, gift wraps, paper, and wooden lamination, insulations to keep building cool, liquid products packages, and frozen foods. The products are distributed to domestic and international customers at a ratio of 48 % and 52 % respectively (calculated from net sales in 2024).


These are 6 types of films that can be used together or substituted one another depending on the final product’s characteristic and customer’s choice.


• Characteristics of BOPP Film

BOPP film is made of polypropylene resin, which can be used in:

1) Packaging production for consumer products packaging as it can be combined with other types of film to enhance

its properties to be more efficient improve products’ appearances, and extend their shelf lives.

2) Adhesive tape production

3) Paper and wooden lamination

4) Packaging of products such as garments and flowers

5) Making gift wrapping paper


• Characteristics of BOPET Film

BOPET film is made of polyester Terephthalate resin, which can be used in:

1) Packaging production or laminating over BOPP film for preserving food’s odor and freshness

2) Microwave heating as it can stand the high temperature

3) Producing adhesive tapes

4) Making the insulation in electrical wire, battery,and and capacitor industry


• Characteristics of BOPA (Nylon) Film

BOPA film is made of Polyamide resin which has dominant characteristics in high puncture resistance, resistance to hot and cold temperatures. Therefore, it is widely used in the food industry that are liquidity and consumable products such as

1) Retort food and liquid food

2) Household chemicals such as liquid soap, shampoo, fabric softener, cleanser

3) Vegetable oils and seasoning

4) Frozen food

5) Rice

6) Vacuum packaging


• Characteristics of CPP Film

CPP film is manufactured from Polypropylene resin similar to BOPP film. CPP film has a superior characteristic for sealing with other types of film with lower heat requirements therefore, the film is widely used in printing jobs for confectionary foods or constant noodles. Moreover, CPP film has an outstanding characteristic of being glossy and having good texture so it is popularly used for food or bread packages that could add more product value.


• Characteristics of METALLIZED Film

METALLIZED film is made by feeding BOPP, BOPET, BOPA, or CPP film through metalizing process. This film is considered as a specialty film which has better selling price than regular film and can generate additional revenue for the company. The important characteristics of METALLIZED film are;

1) Sparkling effect on packages

2) Barrier properties: Both of Oxygen and Moisture resistance are better than normal BOPP, BOPET, BOPA, and CPP film.


• Characteristics of COATED Film

COATED film is made by feeding BOPP, BOPET, BOPA, CPP, or METALLIZED films through coating process that is equipped with specific chemicals. The film is considered another type of specialty film that gives higher value to the products by increasing preserving properties keeping odor of food and extending the shelf life of food. Also, the film itself can be quoted higher due to its superior characteristics.

Research & Development

Has R&D Policy (Y/N)

Yes

R&D Cost — Description

The Company's research and development expenses come from the importance and focus on developing green products that use both biomass and various recycled raw materials, develop bio-based plastic films, post-industrial recycled film and post-consumer recycled film to create new opportunities and respond to market demands that tend to change quickly.

R&D Cost — Label

Research and development (R&D) expenses over the past 3 years (Million Baht)

R&D Cost — This Year

227234231.0

R&D Cost — Last Year

171522264.0

R&D Cost — 2 Years Ago

0.0

Assets Used in the Business

Permanent Assets — Description

Major fixed assets consist of land building equipment and machinery as of December 31, 2024 are as follows:

Permanent Assets — Appraisal

AssetOwnershipObligationAppraisal Value
LandOwnerNone364,101,000
Building and PlantOwnerNone1,636,290,000
Machinery and EquipmentOwner3 machines with mortgage (see notes to the financial statements no. 14)7,085,374,000
VehicleOwnerNone5,388,000
Office furnitureOwnerNone22,528,000
Assets under constructionOwnerNone144,791,000

Intangible Assets — Description

Intangible assets consist of :

1. Deferred computer softwares : Deferred computer softwares are stated at cost net from cumulative amortization which is calculated by the straight-line method based on the estimated 3 - 10 years.

2. Research and development : Expenditure incurred from products development is recognized as an asset when the Company can demonstrate all of the following :

2.1) The expenditure attributable to its development can be measured reliably and feasibility in technical, financial, commercial, and resource and ;

2.2) The Company intends to and has the ability to complete the development for the purpose of using or selling.

Expenditure from product development are amortized when the asset is ready to use in production process by the straight-line method over the period of its expected benefit 5 years.

Has Subsidiaries Investment Policy (Y/N)

Yes

Subsidiaries Investment Policy — Description

The Board of Directors Meeting no. 10/2020 on October 29, 2020 have approved to establish a subsidiary and a joint venture in Vietnam with SCG Chemicals Public Company Limited. On November 5, 2020, the Company entered into a Joint Venture Agreement with SCG Chemicals Public Company Limited to established a company in Vietnam for manufacturing and distributing packaging films. The joint venture company has a registered capital of 1,526 million baht, of which the Company hold 55% of the total issued and paid-up capital.

Marketing Policy & Competition

Reporting Mode

3117

Marketing Policy (Overall)

Competition Strategy

The Company has competition strategy as follows:

• Producing products with high-quality standards to satisfy customers and support production in the related industry.

• Offering reasonable prices to customers.

• Ensuring on-time delivery

• Providing excellent after-sales service that is fast and on time as the Company’s products will be processed by customers, providing customers with information and suggestions will benefit the customers and consequently strengthen the relationship.


Target Customers’ Characteristics

The Company’s customers can be categorized as follows:

• Printing factories, Side Seal bags, and other packaging printing factories, which are the

products used as the products, food, and snack packages.

• Adhesive tape manufacturers.

No customer contributes more than 30% of the company’s total revenue.


Distribution and Distribution Channels

The Company distributes to both domestic and international customers with the distribution channels as of December 31, 2024 as follows:

• Domestic market: The Company sells directly to all types of customers. Domestic sales were 48% of total sales revenue.

• International market: The Company distributes products to various countries including Japan, South Korea, Australia, Taiwan, Hong Kong, Vietnam, Malaysia, Italy, Philippines, Singapore, Indonesia, Mexico, and the United States for instance. In most cases, the products are sold through agents who directly coordinate with customers. The customers open the L/C directly to the Company and the agents receive the commission. International sales accounted for 52% of total sales.

Industry & Competition (Overall)

Plastic Packaging Industry


Plastic packaging products which the Company produces and distributes to both domestic and export markets consist of BOPP, BOPET, BOPA, CPP, METALLIZED and COATED films. The products are used by printing houses and converted to packaging for food and non-food applications.


The demand of packaging materials has expanded rapidly especially in food industry which relies on plastic packaging because plastic is light, easy to transport with low cost. In addition, the design of plastic packaging is attractive in the eyes of end consumers. The demand of packaging materials is attributed by the growth of population and economy which create purchasing power and demand for consumption.


Competition


The packaging materials are well received and very much in demand, which leads to capacity expansion in order to respond to market growth. As competition can occur at any level of market demand, therefore, the Company has developed personnel in marketing and production to attain a high level of efficiency. The Company’s policy is to produce quality products at a reasonable price and with fast deliveries.


The plastic raw materials and products imported from free trade areas of which Thailand is a member, i.e. ASEAN-Korea, ASEAN-China are eligible for 0% import duty. This would allow the Company products to obtain lower production cost and become more competitive compared with products from other producers outside the free trade areas. Thailand is searching for more economic partnerships to expand international trade that will promote business activities and wealth to people as a whole. Peru is the latest partnership agreement which came into effect in 2012. The change of AFTA’s status to AEC in 2015 means that the activities will expand rapidly not only in trade but there will the flow of investment, service, and labor across the whole region. The coming negotiation is the European Union (EU) which will come in place of the GSP (Generalized System of Preference) which Thailand will not be eligible for the preference of import duty from 2014 due to the rise of the national income.


• BOPP Film

BOPP film is frequently used in the flexible packaging industry because of its low cost and is able to efficiently preserve the shelf life of foods and snacks. The demand for BOPP film is growing at a fast rate due to the growth of population and economy levels which in turn create a constant demand for consumer goods. The market price is determined mainly by demand and supply.

There are 2 competitors in the domestic market: Thai Future Incorporation Public Company Limited and SRF Industries (Thailand) Limited. With the market strategy in terms of product quality, good service, and customer relationship enhancement, the Company was able to maintain its domestic market share. Also, the Company has competitive advantage over overseas competitors based on product quality and delivery lead time. In the past, high import duties served as a barrier to protect local producers. However, the import duty is gradually reduced in line with World Trade Organization (WTO) and FTA commitments. The Company is aware of the situation and has prepared measures.


• BOPET Film

BOPET film is another type of film that is commonly processed into packaging. It has a superior property for air permeability and is suitable for odor and flavor retaining, also extend product life. Therefore, a decision to use either BOPP film or BOPET film depends on the applications. Apart from its extensive use in the food industry, BOPET film can be applied in various industries as it has the finest heat resistance properties such as electric wire wrapping, building heat insulation, audio vision, air duct, and apparel decorations due to its excellent heat resistance and electrical insulation.

There are two domestic competitors which are Polyplex (Thailand) Public Company Limited and SRF Industry Company Limited, both of them only produce BOPET film. These competitors have no direct impact on the Company’s position because of high level of demand in the market. Furthermore, as most customers require a combination of BOPP, BOPET, and CPP film at the same time, they generally prefer to order all film types from a single producer rather than making split orders. The Company, therefore, has higher potential to serve these preferred needs. The Company also has a competitive advantage over imported films as the local customers not only consider product quality and standard, but also lead time to delivery, import duty, and term of payment.


• BOPA Film (Nylon)

BOPA film is being used extensively in packaging for liquid food industry, retort and frozen food because of its excellent characteristics in puncture resistance, heat and cold resistance, oil resistance, and abrasive resistance. Therefore, BOPA film, BOPP film and BOPET film are the Company’s products which can be used extensively in food and consumable product industries.

While there is another domestic producer, Thaipolyamide Company Limited, who started producing the BOPA film at the same time, the company has been using past experience in films production and distribution to quickly gain market penetration. The success is also caused by product quality, after-sales service, and the Company’s business nature which has no conflict of interest with customers.

For competition against imported products, as there was no domestic manufacturer of BOPA film in the past, the product is still imported now but at a lower proportion. The Company is confident that, within a short time, it will be able to compete based on its product quality and service and will capture more market share.


• CPP Film

CPP film is produced from the same type of resin as BOPP film. It has better properties on heal seal strength and high gloss therefore, it is suitable to be used as the inner layer of packaging.

In 2015, the Company installed the first CPP line during the last quarter of the year. The capacity is around 16,000 tonnes per year. CPP film is widely used with other types of films from the Company; BOPP, BOPET, and BOPA films. This could be considered as giving higher value to customers when it comes to selecting the single supplier. Competitors for this product are smaller-sized manufacturers in Thailand and importers from Indonesia, for instance. The Company expects that the market for CPP films will keep on growing from domestic and international needs. Moreover, the addition of CPP film production capacity has helped to expand the base of the product range to be more diverse and comprehensive compared to the competitors which would better respond to the customers’ needs.


• METALLIZED Film

This film is made by metallizing plain film with Aluminum, which allows the film to better prevent air and humidity permeability and further extends the life of packaged product compared with using regular films. Thus, METALLIZED film is suitable for product packaging. Moreover, this product can be used in other industries in many applications such as flower wrap or air duct cover as it can also prevent heat circulation.

Currently, the Company has a total of 5 METALLIZED lines. The first 4 machines are designed for Wire-Feed processing. In principle, the process calls for the evaporation of the coating material inside a vacuum chamber. Inside this chamber, aluminum wire is fed onto individual, resistance-heated inter-metallic evaporators, where the aluminum becomes molten and evaporates onto the film. The latest machine is Crucible type vacuum Metallizer machine which employs the method of melting aluminum in a crucible pot which provides excellent deposition quality and uniformity. This creates higher value added to our product. The Company expects that the market needs for two different metallized products will continue to grow and will lead to less competitive environment in the METALLIZED film segment.


• COATED Film

COATED film is a film that gets coating processed with specific chemicals. This film will possess better air and humidity permeability and further extend product life. This product could add more value to the Company due to its superior characteristics.

There is competition from small producers in Thailand and imported films from Japan. However, the Company expects that the coating film market will continue to grow both domestically and internationally. In addition, the expansion of the product base has made the products of the Company more variety and comprehensive to be able to meet the needs of more customers.

Procurement of Products & Services

Reporting Mode

3117

Procurement (Overall)

The Company manufactures film by extruding and processing plastic resin through injection and biaxial orientation into film sheets. Then the sheet will be slitted into sizes according to customers’ orders. The Company currently has 3 factories location, which are located in Laemchabang Industrial Estate, Chonburi Province and another two are under the construction at Pinthong 5 Industrial Estate in Chonburi province, and at Bau Bang Industrial Estate, Vietnam. In 2024, the Company has a total production capacity 271,500 tonnes per year.


Production capacity for each individual product is as follow;

• BOPP Film 3 Lines (126,000 tonnes/year)

• BOPET Film 2 Lines (76,000 tonnes/year)

• BOPA Film 3 Lines (30,000 tonnes/year)

• CPP Film 1 Lines (16,000 tonnes/year)

• METALLIZED Film 6 Lines (23,500 tonnes/year)



Raw Material Acquisition (Overall)

The raw materials used in film production are Polypropylene resin for BOPP film and CPP film Polyethylene Terephthalate resin for the production of BOPET film and Polyamide resin is used to produce BOPA film. For METALLIZED film and COATED film, the based film used are BOPP, BOPET, BOPA, or CPP films, which are considered the Company’s main products that are processed through Aluminum metalizing and chemical coating process, respectively.

In 2024, most resin supplies came from domestic sources which accounted for 48.86% while 51.14% were imported. The Company does not have purchases plastic resin from one domestic producer more than 30% of total purchases.

Plastic resin is considered a commodity which enables the Company to procure the raw materials with equal quality from domestic and oversea sources. At present, the Company orders raw materials both domestically and internationally in similar quantities because the prices are similar and the inventory can be efficiently managed and to reduce the risk of relying on a few domestic suppliers.

Production Policy (Overall)

It is the Company’s policy to produce a high-quality product and to conform to ISO 9001: 2015 ISO 14001:2015 and GHP & HACCP standards to be well accepted in both domestic and international markets. This enables our customers to utilize our products effectively in downstream business. The Company also emphasizes production toward sustainable development as certified, such as ISCC Plus Certification, Global Recycle Standard, and Circular Economy Management System certifications, etc. Below are the derived factors in quality and standard improvement.


• Human resources needs to be developed and trained to effectively work to support the industry’s expansion.

• Machinery needs to be innovated to respond to the increasing customers’ demand and allow production control to be

more effective and efficient.

• Raw material needs to be procured from a high-quality and fairly priced sources.

• Focusing on sustainable business operations with environmental, social, and governance (ESG).

Distributors (Overall)

The main raw material distributor is suppliers of raw materials, namely plastic resins, which include Polypropylene (PP) resins, Polyethylene Terephthalate (PET) resins, and Polyamide (PA) resins, which resin suppliers are the highest proportion of purchase value.

Number of Raw-Material Distributors (Overall)

27

Production Capacity (Overall)

ItemUnitUsedCapacity
A.J. Plast Public Company Limited Branch 1 Laemchabang Industrial EstateTon51176,500
A.J. Plast Public Company Limited Branch 3 Pinthong Industrial EstateTon8295,000

Domestic/Overseas Purchase Proportion (Overall)

Raw MaterialSource CountryValue
Plastic ResinThailand2,802,434,126.3
Plastic ResinChina2,092,405,787.05
Plastic ResinVietnam523,395,619.39

Projects Under Construction

Has Projects Under Construction (Y/N)

No

Debentures & Bills of Exchange

Has Debentures (Y/N)

No

Convertible Securities

Has Convertible Securities (Y/N)

No

Contents